Project Description
Chopped Strand Mat Light Weight 100g
WB-E-CSML Light Weight 100g Chopped Strand Mat is made from E-glass low size chopped strands around 50mm in length, bonded together by powder or emulsion binder which makes it perfectly suitable for use with polyester resins.
| Model Number: | WB-EMC100P/E |
| Supply Alility: | 3000 Tons / Month |
| FOB Port: | Chongqing, China |
| MOQ: | 5000 KGS |
Send Inquiry
Features
High smoothness of the laminate surface.
Good compatibility with vinyl ester, epoxy resins.
Good adaptability.
Highly suitable for good surface appearance.
Highly suitable for first layer with gel coat.
Specification
| Type of Glass | E |
| Unit weight (g/m2) | 100, 120, 150, 200, 225 |
| Width (cm) | 20-320 |
| Binder | Powder, Emulsion |
| Unit weight | ±20% |
| Width tolerance | ± 5mm |
| Mosisture Content | ≤0.2% |
| LOI | 4~12% |
Application
WEIBO-E-CSML 100g chopped strand mat is suitable for application by hand lay-up, mold process, to make FRP sheets and panels, vehicles, boat hulls, cooling towers, etc.
Storage
Chopped strand mat should be placed in a dry, cool damp-proof place.
It should always be remained in the original packaging before and after use.
The best storage temperature is between15 ℃ to 35 ℃, relative humidity of 35% -65%.
Packaging
Our Fiberglass Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 76mm. The roll outside diameter is approximately 275mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.
| Carton height (mm) | Width+50 |
| Roll inside diameter (mm) | 80 |
| Roll outside diameter (mm) | 275 |
| Roll weight (kg) | 20-45 |