WB-E-CSM Chopped Strand Mat is produced by E-glass chopped strands around 50mm in length, bonded together by powder or emulsion binder which is extremely soluble in styrene. There are different designs for hand lay-up(CSMH), compression molding(CSMC), machinery(CSMM) etc.
Excellent impregnation properties.
Low resin consumption.
Good mechanical properties.
Type of Glass
Unit weight (g/m2)
WB-E-CSM chopped strand mat is designed for hand lay-up, compress molding, and machinery etc. It is compatible with epoxy, vinyl ester and UP resins in the following applications: auto parts, boats, bath equipment, chemical tanks, cooling tower and building components.
Chopped strand mat should be stored in its original packaging in a dry, cool and water-proof place. The recommended conditions are at temperatures from 15 to 35°C and humidity between 35 and 65%. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high, when the pallets are stacked in 2 or 3 layers, special care should be taken to move the top pallet correctly and smoothly.
Our Fiberglass Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 76mm. The roll outside diameter is approximately 275mm. Each roll is wrapped up in plastic film and then packed in a carton. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.